We are able to achieve very accurate level of detail using our CNC carving and milling technology across a range of varied substraights. These include Iroko, Oak, Cedar, Ash, Douglas Fir, Birch and Mahogany face exterior Plywood’s. Along with more exotic materials such as High Density Urethane
We are also able to finish many of these signs to Pantone, RAL or BS4800 colour, as well as a large range of Metallics
The Brief: CNC Cut letter with back lit Halo LED lighting
| Process
Channel cut letter backs for inset LED modules |
| Material
High Density Urethane with Acrylic Paint |
| Finish
Sandblasted Douglass Fir – Distressed Wooden Panels |
The Brief: Large scale wooden signage for “The Courtyard” in Skegness. To create a Large wooden entrance sign using 3D lettering and sandblasted wood backboard. High impact visually for ease of public viewing and wayfinding.
| Process
3D Theme park style sign. Use of full 3D letters on top of a full sandblasted wooden panel. To finish the look a custom layer of Dibond leaves and vine have been sculpted to wrap around the letters and sign |
| Material
HDU, Douglas Fir, Dibond, Wire |
| Finish
Natural look water based finishes used on the wooden part of the entrance sign, high durability acid catalyst colour and lacquer used on the HDU letters. |
The Brief: A dimensional sign with a postage stamp cut edge
| Process
HDU Raided letters finished with a gradient fill to emulate gold |
| Material
High Density Urethane letters on Boat Builders Plywood |
| Finish
Latex Water based paint to backboard, Acrylics to letters |
The Brief: Important entrance letters for Longleat Safari Park on Stainless Steel trammels
| Process
CNC Cut Out Letters |
| Material
100mm thick High Density Urethane |
| Finish
4 coat acrylic spray-painted with UV lacquer |
Sandblasted Western Red Cedar Sign fabricated to fit onto Entrance portico with CNC Cut Wooden Letters and Laser Carved Plaque in Cedar.
| Process
CNC Cut Wooden Letters mounted on to Red cedar sign |
| Material
Red cedar |
| Finish
Sandblasted Western Cedar with colour infill |
The Brief: CNC Cut Letters and Logo for ios clothing co. This is a 2mtr Long CNC Cedar Cut Graphic Laminated onto Marine Boatbuilders Plywood For Extra strength. The Sign was Fitted straight onto a Slate Door Canopy.
| Process
CNC Cut with integrated stand |
| Material
42 mm Western Red Cedar laminated to 18 mm Boat Builder Plywood |
| Finish
4 coat satin Acrylic with UV lacquer |
The Brief: Create delicate laser cut letters finished in bright gold
| Process
Laser cut MDF |
| Material
Medium Density Fibreboard |
| Finish
Bright Gold Acrylics with protective lacquer |
The Brief: Replicate 600mm tall cast iron letters
| Process
Laser Cut MDF with authentic rust finish |
| Material
Medium Density Fibreboard |
| Finish
Simulated Rust |
The Brief: Gendall Design – For Away Resorts – Create imposing entrance letters for Bar Entrance
| Process
HDU Letters with Manila rope ampersand. The rope was mounted onto Plywood sprocket |
| Material
High Density Urethane |
| Finish
4 coat Acrylic with UV lacquer |
The Brief: For Wrights gpx plastic limited
| Process
CNC Cut lightweight HDU for ceiling hanging signs |
| Material
High Density Urethane |
| Finish
4 coat Acrylic with lacquer |
